Or, build your own (DIY) Cabinet
 

QCS22  22-Space Walnut Studio Cabinet
Holds 22 single-width panels in a single row. Holds 4 single-width panels in the rear which is usually used for power entry and exit, logo panels, etc. Plenty of depth for mounting a power supply and DC cable harness. Rubber feet prevent slipping from patching forces. Panel mounting screws included. Modules and power components not included.

        See this close up of the walnut         See a Rear view

Dimensions
48-3/8"w x 8-1/2"d x 10"h,       7.75" available behind the panel.

Shipping Information
12" x 12" x 52", 22 pounds.

Price
$275.00 US.

QCS44  44-Space Tilted Walnut Studio Cabinet
Holds 44 single-width panels in a two rows. Holds 4 single-width panels in the rear which is usually used for power entry and exit, logo panels, etc. Plenty of depth for mounting a power supply and DC cable harness. Tilted front makes patching easier and provides a solid base for stacking QCS22 cabinets. Rubber feet prevent slipping from patching forces. Panel mounting screws included. Modules and power components not included.

Dimensions
48-3/8"w x 14-3/4"d x 18"h

Shipping Information
A $50 packaging charge applies.
Package dimensions: 24" x 24" x 60", 100 lbs
40 lbs for packaging, 60 lbs for cabinet.
Normally ships via truck.

Price
$475.00 US.

QCSKG  Keyboard Garage for Walnut Studio Systems
Place under a tilted or top cabinet to allow easier patch cord access and to provide a storage space for the keyboard. Angled sides match the studio tilted cabinet and the studio keyboard. Solid walnut construction. Rubber feet prevent slipping from patching forces.

Dimensions
48-3/8"w x 14-3/4"d x 6-3/8"h

Shipping Information
12" x 24" x 60", 28 pounds.

Price
$250.00 US.

QCC  Crown For Inverted 44-Space Studio Cabinet
This 3" tall crown mounts on top of an inverted 44-space tilted cabinet to provide a finished look. Also provides a mounting surface for user-supplied lighting. Includes mounting hardware.

Dimensions
48-3/8"w x 14-3/4"d x 3"h

Shipping Information
12" x 24" x 60", 20 pounds.

Price
$150.00 US.

QCB  Bracket Set for Stacking Studio Cabinets
Use this bracket set to connect your walnut studio cabinets together. Each set includes 2 pair of short brackets, 1 pair of long brackets, screws and washers.

Price
$150.00 US.

QCP22  22-Space Portable Cabinet
Holds 22 single-width panels in two rows. Plenty of depth for mounting a power supply and DC cable harness. Rubber feet prevent slipping from patching forces. Panel mounting screws included. Modules and power components not included.

See this close up of the vinyl and hardware

Dimensions
25"w x 7"d x 20"h       5.25" available behind the panel.

Shipping Information
30" x 24" x 12", 20 pounds.

Price
$225.00 US.

QCPL  Dual Hinges and Latches for Portable Cabinets
A pair of slip-apart hinges and latches to attach 2 portable cabinets face-to-face. Paint color and fasteners match other hardware.

Price
$50.00 US.

Technical information about rack frames.

QCR8  8-Space Rack Frame
Holds 8 single-width panels in one row. A power supply and DC cable harness must be mounted in the user-supplied cabinet behind the panel. Module mounting screws included.   Modules and power components not included. See Erik Norlanders huge Moog/Synthesizers.com system using QCR8 Frames.

Dimensions
19"w x 1/8"d x 8-3/4"h (5U tall)

Price
$65.00 US.

On rack-mount systems it is UP TO YOU to prevent access to dangerous voltages! High voltages can scare, hurt or kill people!

    See the cable page for details

 

Moog Voltage to Switch Trigger Cables
This cable converts voltage levels to switch trigger signals to activate Moog envelope generators and other modules. Male 1/4" plug on one end and a 2-pin Cinch/Jones plug on the other.

    See the cable page for details

For knobs and parts for Hammond Organs see: http://www.halfmoonelectronics.com

Knobs
794  1" Round Knob (dual dots)    Price: $4.00 US.
795  1-1/8" Pointer Knob    Price: $4.00 US.
QMMKK  Complete Mini-Moog Knob kit    Price: $108.00 US.     Details

Screws
901/100  Machine Screw, 6-32 x 3/8 for racks    Price: $10.00/box of 100 US.
876/100  Wood Screw, #6 x 1/2 for studio & portables    Price: $10.00/box of 100 US.

Lamps
197  Incandesent Lamp for Q960 and Q962 T-2 Slide-In 16ESB    Price: $2.00 US.

Pots, Jacks, Switches, Connectors
QP-P16  Pot, 100K, 6" cable and connector    Price: $4.00 US.
QP-P26  Pot, 1M, 6" cable and connector    Price: $4.00 US.
QP-S16  Switch, Toggle DPDT, 6" cable and connector    Price: $6.00 US.
QP-S26  Switch, Toggle SPDT center-off, 6" cable and connector    Price: $6.00 US.
QP-S36  Button, 6" cable and connector    Price: $5.00 US.
QP-C16  Jack, 1/4", 6" cable and connector    Price: $2.50 US.
665  MTA Connector, 6 pin female for DC power    Price: $.25 US.

Maintenance Kit
Use this kit for long term maintenance of your synthesizer. Included are standard 100K pots, 1M pots, 1/4" jacks, round knobs, pointer knobs, screws and other items you may need to maintain your system.

Includes:

5) 100K pot with cable/conn.
2) 1M pot with cable/conn.
5) 1/4" jack with cable/conn. 25) #6 x 1/2 black sheet metal screw
5) 1" round knob
2) 1-1/8" pointer knob
2) Red push button with cable/conn.
2) DPDT toggle switch with cable/conn.
2) SPDT toggle switch (center off) with cable/conn.
5) TL074 IC
4) CA3080 IC
5) Red LED