Power Components
Q104 MIDI Interface
Q105 Slew Limiter
Q106 Oscillator
Q107 Filter
Q108 Amplifier
Q109 Envelope Generator
Q110 Noise Source
Q111 Pan/Fade
Q112 4-Channel Mixer
Q113 8-Channel Mixer
Q115 Reverb
Q116 Ring Modulator
Q117 Sample & Hold
Q118 Instrument Interface
Q119 Sequencer
Q120 Connector Interface
Q121 Banana Jack Interface
Q122 Mini Jack Interface
Q123 Standards
Q124 Multiples
Q125 Signal Processor
Q127 Fixed Filter Bank
Q128 Switch
Q130 Clipper & Rectifier
Q131 Blank Panels
Q138 Logo Panel
Q140 Fixed Filter Bank Aid
Q141 Oscillator Aid
Q142 Pedal Interface
Q143 Presets
Q146 Normalization
Q147 Distributor
Q149 Signal Selector
Q150 Ladder Filter
Q161 Oscillator Mixer
Q162 Filter Mixer
Q171 Quantizer Bank
Q172 Quantizer Aid
Q960 Sequential Controller
Q961 Sequencer Interface
Q962 Sequential Switch
Q963 Trigger Bus
 

1/4" Patch Cables

Rugged patch cables have 1/4" plugs on each end. Connectors have metal barrels and a heat shrink strain relief with the 'synthesizers.com' imprint. Each length has its own color to for quick selection. Barrels are glued to eliminate annoying unscrewing. We use high quality connectors with copper cores and Belden instrument cable.
Available in these lengths:

QP4MM-12   12" Patch Cable (brown)     $8.50
QP4MM-24   24" Patch Cable (red)         $8.50
QP4MM-36   36" Patch Cable (orange)   $8.50
QP4MM-48   48" Patch Cable (yellow)     $8.50
QP4MM-60   60" Patch Cable (Green)     $8.50 (Limited Availability)
QP4MM-72   72" Patch Cable (blue)        $8.50

Moog Voltage to
Switch Trigger Cable

This cable converts voltage levels to switch trigger signals to activate Moog envelope generators and other modules. It also allows our Keyboard Controller, Q960 sequencer and other modules to control a MiniMoog.

Male 1/4" plug on one end and a 2-pin Cinch/Jones plug on the other.

Learn all about gates and triggers.

QMVS-48   48" Moog Voltage to Switch Trigger Cable (yellow)     $27.00