Synthesizers.com Modular Analog Synthesizers home page
Fine modular analog synthesizers featuring classic styling and world-class customer service

Parts

We do not sell parts beyond those listed here.

For repair and maintenance questions, use our Contact Form.
See our technical page for more information.

These parts are on our Order Form in the PARTS category.


Minimoog Knob Kit Minimoog Knob Kit

Minimoog Knob Kit

A complete knob replacement kit to make your classic Mini-Moog like new.

These knobs are from the original manufacturer and have dual-dots and brushed-metal inlays exactly like the originals.

Kit includes:

  • 19 Round knobs
  • 6 Pointer knobs for range and waveforms
  • 2 Large round knobs for oscillator tuning

Knobs may have hex-head or slot head set screws.

to the top QMMKK: $108.00 USD

Wood screw for mounting modules

Wood Screw

These #6 x 1/2" screws are used to mount modules to Studio cabinets, Portable cabinets and Entry System cabinets. These screws are included when you buy a cabinet or a system. Screws are not included with modules.

to the top 876/100: $10.00 USD for box of 100

Machine screw for mounting modules

Machine Screw

These 6-32 x 1/2" machine screws are used to mount modules to QCR8 Rack Frames, Box11 cabinets and Box1,2,4 cabinets. These screws are included when you buy a rack frame, cabinet or a system. Screws are not included with modules.

to the top 901/100: $10.00 USD for box of 100

round synthesizer knob

Round Knob 1"

This knob is used on many of our modules. 1/4" shaft with set screw.

to the top 794: $4.00 USD

pointer synthesizer knob

Pointer Knob 1-1/8"

This knob is used on many modules such as the Q106 oscillator for range switching and the Q960 sequencer for mode switching. 1/4" shaft with set screw.

to the top 795: $4.00 USD

Incandescent Lamp for Q960 and Q962

Incandescent Lamp

This lamp is used on our Q960 sequencer and Q962 sequential switch modules.

to the top 197: $2.00 USD

Maintenance Kit with synthesizer parts

Maintenance Kit

A nice collection of spare parts for your synthesizer including various pots, jacks, switches, chips, knobs, etc.

Includes:
  • 5) 100K pot with cable/conn.
  • 2) 1M pot with cable/conn.
  • 5) 1/4" jack with cable/conn.
  • 25) #6 x 1/2 black wood screw
  • 5) 1" round knob
  • 2) 1-1/8" pointer knob
  • 2) Red push button with cable/conn.
  • 2) DPDT toggle switch with cable/conn.
  • 2) SPDT toggle switch (center off) with cable/conn.
  • 5) TL074 IC
  • 4) CA3080 IC
  • 5) Red LED
to the top QM1: $49.00 USD

Jack assembly with 6 inch wires

Jack Assembly

This standardized jack assembly is used on most of our modules. It has a 2-pin connector with 6" wires. Easy to replace. No soldering required.

to the top QP-C16: $2.50 USD

100k pot assembly with 6 inch wires

Pot Assembly, 100K

This standardized 100K pot assembly is used on many of our modules. It has a 3-pin connector with 6" wires. Easy to replace. No soldering required.

to the top QP-P16: $4.00 USD

1M pot assembly with 6 inch wires

Pot Assembly, 1M

This standardized 1M pot assembly is used on some of our modules including the Q109 Envelope generator It has a 3-pin connector with 6" wires. Easy to replace. No soldering required.

to the top QP-P26: $4.00 USD

DPDT switch assembly with 6 inch wires

Toggle Switch Assembly, DPDT

This standardized toggle switch assembly is used on many of our modules. It has 2 3-pin connectors with 6" wires. Easy to replace. No soldering required.

to the top QP-S16: $6.00 USD

SPDT switch assembly with 6 inch wires

Toggle Switch Assembly, SPDT

This standardized toggle switch assembly is used on many of our modules. It has a 3-pin connector with 6" wires. Easy to replace. No soldering required.

to the top QP-S26: $6.00 USD

Push button switch assembly with 6 inch wires

Push Button Assembly

This standardized push button switch assembly is used on many of our modules such as the Q109 Envelope generator and the Q119 Sequencer It has a 2-pin connector with 6" wires. Easy to replace. No soldering required.

to the top QP-S36: $5.00 USD

Q106 Range switch assembly

Q106 Range Switch Assembly

Replacement for the Q106 Range Switch. Easy to replace. No soldering required.

to the top QP-S46: $15.00 USD
  • LM Wrote: I am really impressed with how simple replacing this part will be. This is a very well thought out design on the Q106.

For technical questions, please use our Contact Form

Copyright Synthesizers.com

Synthesizers.com Facebook group
Synthesizers.com Google Plus group
Email synthesizers.com web page
Tweet about synthesizers.com
print synthesizers.com
Synthesizers.com Logo
To Top
Empty