modular analog synthesizer for electronic music
Home Prices Books Technical Site Map
Comments About Links Shirts Banner
Artists Humor Sounds Future Cables
Forum SynthInvent Gallery Brochure Custom
WIKI DIY Entry Sys WebCam Resources
Facebook Calendar Power Datasheets MOK
 Q112  4-Channel Mixer

Click Image for Large View 

Click here to see a large image
The Q112 Mixer provides common mixing functions needed in all systems. A total of four inputs can be mixed. Three of the inputs have attenuators.

Controls and Connectors

    Input Level Controls
      Allows attenuation of input signals.
    Input Connectors
      Input signals to be mixed.
    Output Connector
      All four signals are mixed together and provided at this output.
Panel Size:  Single width 2.125"w x 8.75"h.
Signal Levels:  10V PP maximum
Power:  +15V@30ma, -15V@30ma

$81.00 US.

Usage and Patch Tips

A mixer is basically an electrical adder. All the signal inputs are added together and presented at the output. Three of the inputs have attenuators and one does not. You can use a Q125 Signal Processor to attenuate signals before applying them to the unattenuated inputs. Since the signals are added, it's possible to create large signals that may clip which may or may not be desired.

Making New Waveforms
You can create new waveforms by mixing two or more from a single oscillator. The signals will be in phase and create a new stable, unbeating waveform. This can create interesting harmonics that can then be filtered.

Mixing Control Signals
The mixer has DC inputs and outputs which means it can mix slow-moving control signals. This can be helpful when you need to mix an envelope generator output and an oscillator output for use by the filter or other modules that have limited input connectors.

End of Product Information