modular analog synthesizer for electronic music
Home Prices Books Technical Site Map
Comments About Links Shirts Banner
Artists Humor Sounds Future Cables
Forum SynthInvent Gallery Brochure Custom
WIKI DIY Entry Sys WebCam Resources
 Q125  Signal Processor

Click Image for Large View 

Click here to see a large image
The Q125 Signal Processor provides many useful features normally requiring multiple modules.   Audio and control signals can be amplified, attenuated, offset, and inverted all in this one, easy-to-use module.  Two sections allow two processes to be performed at the same time.

Processing:

  • Amplification
  • Attenuation
  • Inversion
  • Voltage Source
  • Offset Adjustment

Controls and Connections
Top Section

    Gain Control
      Sets the overall gain/attenuation. Full counter clockwise results in an inversion of 200%. Full clockwise results in a non-inversion of 200%.
    Offset Control
      Adds a positive or negative offset to the waveform. Full counter clockwise results in an offset of -5 volts. Full clockwise results in an offset of +5 volts. Without an input the offset control can be used to generate a voltage source of -5 volts to +5 volts.
    Input Jack
      Signal to be processed.
    Output Jack
      Signal output.
Bottom Section
    Normal/Invert Switch
      Determines whether the output will be inverted or not.
    Offset Control
      Adds a positive or negative offset to the waveform. Full counter clockwise results in an offset of -5 volts. Full clockwise results in an offset of +5 volts. Without an input the offset control can be used to generate a voltage source of -5 volts to +5 volts.
    Input Jack
      Signal to be processed.
    Output Jack
      Signal output.
Specifications
Panel Size:  Single width 2.125"w x 8.75"h.
Input/Output Levels:  10V PP maximum
Power:  +15V@8ma, -15V@8ma.

Price
$80.00 US.

Randy Wrote: The Q125 is great because it does what normally takes several utility modules on other systems.

Ron Wrote: Your Q125s are a 'swiss army knife' for signal processing.


End of Product Information